Araldite epoxy glue, extra strong professional rapid setting glue 25g x1pc

Araldite, professional fast-setting glue, sold by the piece. High performance quick-setting glue recommended for a wide range of materials (ceramic, stone, wood, leather, jewelry etc...).

This item contains two tubes: one resin and one hardener.

Instructions for use:

1. Make sure the surfaces to be glued are dry and clean. To make the glue adhere better, you can roughen the surface with sandpaper.

2. Dispense equal amounts of both tubes onto a clean, disposable surface, mix thoroughly for at least 45s and use within 4 minutes. Replace the caps properly.

3. Apply to both surfaces and assemble carefully. Hold the assembly in place until cured for at least 15mins (taped) in the air.

4. Allow to dry for at least 1 hour at room temperature before use.